https://doi.org/10.1140/epjs/s11734-026-02459-9
Regular Article
Development and test of a compact RF coupler utilizing additive manufacturing
Institute of Applied Physics (IAP), Goethe-University Frankfurt, Max-von-Laue-Str. 1, 60438, Frankfurt am Main, Germany
a
This email address is being protected from spambots. You need JavaScript enabled to view it.
Received:
10
April
2026
Accepted:
11
June
2026
Published online:
6
July
2026
Abstract
Additive manufacturing has proven to be a powerful technique for rapid prototyping and the fabrication of complex geometries. For use in a 433 MHz IH-DTL cavity, a CF40 coupler was developed and manufactured from high-purity copper by laser powder bed fusion. In this process, metal powder is applied layer by layer and fused with a laser to the existing structure, allowing a water-cooling concept that would be impossible to implement using conventional manufacturing methods. The coupler features a ceramic window water cooled on both sides, an outer conductor with spiral cooling channels, and a water cooled inner conductor. Optimal power transmission is frequency-dependent and is fine-tuned by adjusting the inner conductor geometry through CST simulations. Initial tests of the coupler were carried out during conditioning the Frankfurt Neutron Source IH-DTL at power levels of up to 12 kW continuous wave.
© The Author(s) 2026
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
