https://doi.org/10.1140/epjs/s11734-024-01153-y
Regular Article
Film thickness characterization in dual-axis spin coating of a sphere
1
Department of Mechanical Engineering, University of Canterbury, Private Bag 4800, 8140, Christchurch, New Zealand
2
Department of Electrical and Computer Engineering, University of Canterbury, Private Bag 4800, 8140, Christchurch, New Zealand
a
finn.mcintyre@pg.canterbury.ac.nz
Received:
16
January
2024
Accepted:
14
March
2024
Published online:
31
May
2024
The versatility of spin coating technology makes it a preferred method for producing the thin film layers used to manufacture products from solar panels and smartphones to sunglasses and CDs. However, the process requires a flat, rigid substrate to produce uniform films, which limits its use to planar devices. A novel multi-axis manipulator has been developed to extend the application of spin coating, enabling controlled thin film deposition onto curved surfaces. Various rotational schemes were studied to link the flow of a liquid film over a curved surface to forces induced by complex rotational dynamics. When the angular velocity exceeds a threshold, centrifugal force dominates the flow, pushing the fluid away from the instantaneous axis of rotation. This produces axisymmetric coating profiles when using consistent single or dual-axis rotation. Areas of near uniformity present around the spin axis poles for single-axis rotation and around the substrate’s equator for dual-axis schemes. Sensitivities between the spherical substrate dynamics and the evolving fluid flow were investigated, exploring the parameters that promoted the production of uniform curved film layers for microfabrication processes. This enabled the evolution of the spin coating technique to effectively form curved polymer coatings with improved thickness control. The presented research outlines the capabilities of a multi-axis spin coating machine when used to coat spherical substrates. Therefore, enabling the use of fluid mechanics models to identify the optimal motion kinematics required to create uniform curved films.
© The Author(s) 2024
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
