EPJ Special Topics (EPJ ST)

Open Access

Editorial

Advances in the characterization, modelling and simulation of materials subjected to dynamic loading p. 1

Eric Buzaud, Antonio Cosculluela, Hervé Couque and Ezio Cadoni

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00106-3

Regular Article

Dynamic compaction of polyurethane foam: experiments and modelling p. 3

P. Pradel, F. Malaise, T. de Rességuier, C. Delhomme, G. Le Blanc and J.H. Quessada

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00116-7

Regular Article

Ti6Al4V-AA1050-AA2519 explosively-cladded plates under impact loading p. 17

T. Fras, I. Szachogluchowicz and L. Sniezek

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00114-9

Open Access

Regular Article

Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates p. 29

Ezio Cadoni, Daniele Forni, Roman Gieleta and Leopold Kruszka

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00113-4

Regular Article

Shockless spalling characterization of ceramics in a 1D-stress state p. 45

Benjamin Erzar

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00112-y

Open Access

Regular Article

Comparative quasi-static mechanical characterization of fresh and stored porcine trachea specimens p. 55

Benjamin J. Butler, Alun Williams, Alexander W. Tucker, William G. Proud and Katherine A. Brown

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00104-5

Regular Article

Response of a polystyrene foam subjected to large strains and high pressures p. 61

G.R. Johnson, T.J. Holmquist, S. Chocron and N.L. Scott

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00072-8

Regular Article

DEM/FEM simulation for impact response of binary granular target and projectile p. 73

Shinnosuke Takeda, Kinya Ogawa, Kenichi Tanigaki, Keitaro Horikawa and Hidetoshi Kobayashi

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00071-3

Open Access

Regular Article

A rate dependent experimental and numerical analysis of adhesive joints under different loading directions p. 85

Maria Lißner, Enrique Alabort, Borja Erice, Hao Cui and Nik Petrinic

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00070-x

Regular Article

Strain rate and triaxiality effects on the dynamic ductile damage of DOMEX 355MC p. 99

M.P. Weyer, T.J. Cloete and R.A. Govender

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00068-x

Regular Article

Blast resistance of hybrid fibre reinforced concrete containing polyvinyl alcohol, polypropylene and steel fibres with various shape parameters p. 111

Martina Drdlová, Miloslav Popovič and Ondřej Koutný

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00061-y

Open Access

Regular Article

Temperature and strain rate effects on the mechanical properties of a polymer-bonded explosive p. 127

S.M. Walley, N.E. Taylor and D.M. Williamson

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00060-6

Regular Article

Discrete element modelling of concrete structures under hard impact by ogive-nose steel projectiles p. 143

Andria Antoniou, Laurent Daudeville, Philippe Marin, Ahmad Omar and Serguei Potapov

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00059-y

Regular Article

A highly effective energy mitigation system combining carbon nanotube and buckyballs p. 155

Dayong Hu, Jianxing Hu, Hanlin Jiang and Jun Xu

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00058-6

Regular Article

On the tensile resistance of UHPC at impact p. 167

Kerstin Weinberg and Mohammad Reza Khosravani

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00057-1

Regular Article

High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures p. 179

Ezio Cadoni, Mario Fontana, Daniele Forni and Markus Knobloch

Published online: 10 September 2018

DOI: 10.1140/epjst/e2018-00046-4

EPJ

The European Physical Journal Special Topics

Volume 227 / No 1-2 (2018)

Advances in the Characterization, Modeling and Simulation of Materials Subjected to High Strain Rates

Advances in the Characterization, Modeling and Simulation of Materials Subjected to High Strain Rates

Advances in the characterization, modelling and simulation of materials subjected to dynamic loading p. 1

Dynamic compaction of polyurethane foam: experiments and modelling p. 3

Ti6Al4V-AA1050-AA2519 explosively-cladded plates under impact loading p. 17

Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates p. 29

Shockless spalling characterization of ceramics in a 1D-stress state p. 45

Comparative quasi-static mechanical characterization of fresh and stored porcine trachea specimens p. 55

Response of a polystyrene foam subjected to large strains and high pressures p. 61

DEM/FEM simulation for impact response of binary granular target and projectile p. 73

A rate dependent experimental and numerical analysis of adhesive joints under different loading directions p. 85

Strain rate and triaxiality effects on the dynamic ductile damage of DOMEX 355MC p. 99

Blast resistance of hybrid fibre reinforced concrete containing polyvinyl alcohol, polypropylene and steel fibres with various shape parameters p. 111

Temperature and strain rate effects on the mechanical properties of a polymer-bonded explosive p. 127

Discrete element modelling of concrete structures under hard impact by ogive-nose steel projectiles p. 143

A highly effective energy mitigation system combining carbon nanotube and buckyballs p. 155

On the tensile resistance of UHPC at impact p. 167

High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures p. 179

Conference announcements

EPJ

The European Physical Journal Special Topics

Volume 227 / No 1-2 (2018)

Advances in the Characterization, Modeling and Simulation of Materials Subjected to High Strain Rates

Advances in the Characterization, Modeling and Simulation of Materials Subjected to High Strain Rates

Advances in the characterization, modelling and simulation of materials subjected to dynamic loading p. 1

Dynamic compaction of polyurethane foam: experiments and modelling p. 3

Ti6Al4V-AA1050-AA2519 explosively-cladded plates under impact loading p. 17

Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates p. 29

Shockless spalling characterization of ceramics in a 1D-stress state p. 45

Comparative quasi-static mechanical characterization of fresh and stored porcine trachea specimens p. 55

Response of a polystyrene foam subjected to large strains and high pressures p. 61

DEM/FEM simulation for impact response of binary granular target and projectile p. 73

A rate dependent experimental and numerical analysis of adhesive joints under different loading directions p. 85

Strain rate and triaxiality effects on the dynamic ductile damage of DOMEX 355MC p. 99

Blast resistance of hybrid fibre reinforced concrete containing polyvinyl alcohol, polypropylene and steel fibres with various shape parameters p. 111

Temperature and strain rate effects on the mechanical properties of a polymer-bonded explosive p. 127

Discrete element modelling of concrete structures under hard impact by ogive-nose steel projectiles p. 143

A highly effective energy mitigation system combining carbon nanotube and buckyballs p. 155

On the tensile resistance of UHPC at impact p. 167

High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures p. 179

Share

Conference announcements