https://doi.org/10.1140/epjs/s11734-024-01457-z
Regular Article
Drop-off characteristics of film flow on inclined fibers
1
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52056, Aachen, Germany
2
Department of Thermal and Fluid Engineering, University of Twente, Drienerlolaan 5, 7522 NB, Enschede, The Netherlands
3
TIPs, Université libre de Bruxelles, Avenue F.D. Roosevelt 50, 1050, Bruxelles, Belgium
Received:
8
September
2024
Accepted:
13
December
2024
Published online:
27
January
2025
This paper presents an empirical analysis of a film flow dropping-off from an inclined fiber substrate, where the fiber diameter is on the order of the capillary length. The investigation aims to elucidate the dynamics of beads traveling down the inclined fibers. We explore the parameters influencing the bead’s final shape and their stability on the substrate (in terms of detaching or not detaching) in a flow driven by gravity and affected by surface tension and inertia. Three different growth modes and their connection to the two main existing drop-off mechanisms of beads on inclined fibers, namely drop-off due to unsaturated growth and drop-off due to coalescence events, are established and demonstrated. A new parameter, , is introduced, which includes information about the shape of the beads and its connection to the flow conditions. If
, the bead exhibits a rather sinusoidal shape, indicating that its formation is predominantly influenced by surface tension. If
, the bead is subjected to front-steepening due to an inertia-dominated flow. If
, the bead’s tail aligns with the direction of gravity, experiencing unsaturated growth until it drops off, which indicates a flow condition driven primarily by gravitational forces. Furthermore, this study offers a quantitative experimental basis for flow parameters on inclined fibers, including Nusselt film thickness, healing length within the unperturbed film and rate of growth of beads at the end of healing length, beads crest height, beads velocity, and parameter
for future comparison to theoretical and numerical modelling.
© The Author(s) 2025
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.