https://doi.org/10.1140/epjs/s11734-023-00887-5
Regular Article
Printed circuit heat exchangers and fast neutron radiography
Faculty of Electrical Engineering and Information Technology, Institute of Nuclear and Physical Engineering, Slovak University of Technology in Bratislava, Ilkovičova 3, Bratislava, Slovakia
Received:
13
September
2022
Accepted:
15
May
2023
Published online:
30
May
2023
Non-destructive testing is capable of detecting defects of important components, where a failure could pose a significant hazard and cause severe economic losses. Currently, imaging techniques utilizing gamma or X-ray sources are mainly used and allow to examine of devices ranging in size from units to tens of centimetres, but for industrial-sized large components, these methods usually fail. The utilization of fast neutrons in radiography is a promising alternative, especially for industrial applications. Currently, due to the higher neutron-matter interaction probabilities, most neutron-imaging systems use thermal neutrons originating from research reactors. Due to the intention of on-site inspection of revealing the possible ruptures and failures, this option is not applicable. The paper presents the newly developed neutronic models of printed circuit heat exchangers where the specific ruptures are defined. Next, neutron transport simulations are performed to investigate the different irradiation geometries, various neutron sources, and backfill materials to access the principal detectability of these ruptures in the industrial environment. Finally, conclusions are drawn, and the best backfill material and neutron source are identified in the simplified model.
© The Author(s) 2023
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
