https://doi.org/10.1140/epjs/s11734-024-01402-0
Regular Article
In-line monitoring of a multi-stage drying process for battery electrodes: vol. 1—applying methods of scattered light measurement
1
Thin Film Technology, Karlsruhe Institute of Technology, Kaiserstraße 12, 76131, Karlsruhe, Germany
2
Material Research Center for Energy Systems (MZE), Karlsruhe Institute of Technology, Kaiserstraße 12, 76131, Karlsruhe, Germany
Received:
14
May
2024
Accepted:
8
November
2024
Published online:
29
November
2024
The drying process of battery electrodes is a crucial and expensive step in the battery manufacturing process as it significantly impacts the performance of the final cell. One major challenge is minimising high scrap rates, which has a marked impact on material efficiency and production costs. One approach is to utilise additional in-line sensors to detect and prevent defects at an early stage. Established sensor technology has been employed primarily to measure parameters prior to and subsequent to the drying process. The objective of this study is to examine the potential of a scattered light sensor for monitoring the electrode surface during drying for the first time. The sensor’s ability to detect surface roughness during drying was demonstrated in initial experiments. Further extensive investigations successfully determined the characteristic point of the onset of pore emptying by the sensor. The results suggest that in-line deployment of the scattered light sensor can be highly beneficial, particularly for multi-stage drying processes. On one hand, the sensor serves as a tool for the straightforward configuration of a multi-stage drying process, and on the other hand, for the in-line utilisation of the sensor with the aim of quality assurance.
© The Author(s) 2024
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
